Remove references to old repo

README_HE.md

@@ -66,7 +66,7 @@ certutil -addstore root %USERPROFILE%\.mitmproxy\mitmproxy-ca-cert.cer
 
 
 
-   -עריכת [קובץ הHosts](https://github.com/Melledy/Grasscutter/wiki/Running#traffic-route-map)
+   -עריכת [קובץ הHosts](https://github.com/Grasscutters/Grasscutter/wiki/Running#traffic-route-map)
 
 2. תשנו את שרת בproxy שלכם ל`127.0.0.1:8080`
 

README_es-ES.md

@@ -63,7 +63,7 @@
 
     - Fiddler Classic: Ejecuta Fiddler Classic, activa `Decrypt https traffic` en las opciones y cambia el puerto por defecto ahí (Herramientas -> Opciones -> Conexiones) a alguno que no sea `8888`, y carga [este script](https://github.lunatic.moe/fiddlerscript).
 
-    - [Archivo Hosts](https://github.com/Melledy/Grasscutter/wiki/Running#traffic-route-map)
+    - [Archivo Hosts](https://github.com/Grasscutters/Grasscutter/wiki/Running#traffic-route-map)
 
 2. Establece el proxy de red a `127.0.0.1:8080` o el puerto de proxy que pusiste.
 

README_fil-PH.md

@@ -65,7 +65,7 @@
 
     - Fiddler Classic: Paadarin ang Fiddler Classic, tsaka turn on mo yung `Decrypt https traffic` sa settings at baguhin mo yung default port na nakalagay (Tools -> Options -> Connections) to anything other than `8888`, at saka mo i-load [itong script](https://github.lunatic.moe/fiddlerscript).
 
-    - [Hosts file](https://github.com/Melledy/Grasscutter/wiki/Running#traffic-route-map)
+    - [Hosts file](https://github.com/Grasscutters/Grasscutter/wiki/Running#traffic-route-map)
 
 2. Set mo ung proxy sa `127.0.0.1:8080` or dun sa proxy port na iyong inilagay.
 

README_fr-FR.md

@@ -63,7 +63,7 @@
 
     - Fiddler Classic: Exécutez Fiddler Classic, Activez `Decrypt https traffic` dans les paramètres et changez le port par défaut ici (Tools -> Options -> Connections) à autre chose que `8888`, et chargez [ce script](https://github.lunatic.moe/fiddlerscript).
 
-    - [Fichier hosts](https://github.com/Melledy/Grasscutter/wiki/Running#traffic-route-map)
+    - [Fichier hosts](https://github.com/Grasscutters/Grasscutter/wiki/Running#traffic-route-map)
 
 2. Définissez le proxy du réseau comme `127.0.0.1:8080` ou le port du proxy que vous avez spécifié.
 

README_id-ID.md

@@ -63,7 +63,7 @@
 
     - Fiddler Classic: Jalankan Fiddler Classic, nyalakan `Decrypt https traffic` dalam setting dan ubah port default di sana (Tools -> Options -> Connections) ke apa pun selain `8888`, dan muat [skrip ini](https://github.lunatic.moe/fiddlerscript).
 
-    - [File host](https://github.com/Melledy/Grasscutter/wiki/Running#traffic-route-map)
+    - [File host](https://github.com/Grasscutters/Grasscutter/wiki/Running#traffic-route-map)
 
 2. Atur proxy jaringan ke `127.0.0.1:8080` atau port proxy yang anda tentukan.
 

README_ko-KR.md

@@ -63,7 +63,7 @@
 
     - Fiddler Classic : Fiddler Classic을 실행한 후, Setting에서 `Decrypt https traffic` 옵션을 켜고, Tools -> Options -> Connections에 있는 기본 포트를 `8888`을 제외한 다른 포트로 지정합니다. 그리고 [이 스크립트](https://github.lunatic.moe/fiddlerscript)를 불러옵니다.
 
-    - [호스트 파일](https://github.com/Melledy/Grasscutter/wiki/Running#traffic-route-map)
+    - [호스트 파일](https://github.com/Grasscutters/Grasscutter/wiki/Running#traffic-route-map)
 
 2. 네트워크 프록시를 `127.0.0.1:8080` 로 설정하거나 지정한 프록시 포트로 설정합니다.
 

README_pl-PL.md

@@ -63,7 +63,7 @@
 
     - Fiddler Classic: Uruchom Fiddler Classic, włącz `Decrypt https traffic` w ustawieniach oraz zmień domyślny port (Tools -> Options -> Connections) na dowolny inny niż `8888`, i wczytaj [ten skrypt](https://github.lunatic.moe/fiddlerscript) (w polu FiddlerScript).
 
-    - [Plik hosts](https://github.com/Melledy/Grasscutter/wiki/Running#traffic-route-map)
+    - [Plik hosts](https://github.com/Grasscutters/Grasscutter/wiki/Running#traffic-route-map)
 
 2. Ustaw serwer proxy na `127.0.0.1:8080` albo inny wybrany przez ciebie port.
 

README_ru-RU.md

@@ -63,7 +63,7 @@
 
     - Fiddler Classic: Запустите Fiddler Classic, включите настройку `Decrypt https traffic` в опциях и измените порт по умолчанию (Меню -> Tools -> Options -> Connections) на что-то не равное `8888`, после чего запустите [этот скрипт](https://github.lunatic.moe/fiddlerscript) во вкладке FiddlerSrcipt.
 
-    - [Файл hosts](https://github.com/Melledy/Grasscutter/wiki/Running#traffic-route-map)
+    - [Файл hosts](https://github.com/Grasscutters/Grasscutter/wiki/Running#traffic-route-map)
 
 2. Установите прокси сети в `127.0.0.1:8080`, либо в тот порт прокси, который вы задали.
 

src/main/java/emu/grasscutter/server/packet/recv/HandlerSetPlayerBornDataReq.java

@@ -76,7 +76,7 @@ public class HandlerSetPlayerBornDataReq extends PacketHandler {
         mailBuilder.mail.mailContent.title = welcomeMail.title;
         mailBuilder.mail.mailContent.sender = welcomeMail.sender;
         // Please credit Grasscutter if changing something here. We don't condone commercial use of the project.
-        mailBuilder.mail.mailContent.content = welcomeMail.content + "\n<type=\"browser\" text=\"GitHub\" href=\"https://github.com/Melledy/Grasscutter\"/>";
+        mailBuilder.mail.mailContent.content = welcomeMail.content + "\n<type=\"browser\" text=\"GitHub\" href=\"https://github.com/Grasscutters/Grasscutter\"/>";
         mailBuilder.mail.itemList.addAll(Arrays.asList(welcomeMail.items));
         mailBuilder.mail.importance = 1;
         player.sendMail(mailBuilder.mail);